Instructions for upgrading your ROM to WM 5 Build 14343
At this point, there is 1 BA WM5 English Roms available: Version 5.1.1700 Build 14343
This is a Pre release issue and has its problems check the threads for more info.
This is a BA GSM rom and will only work on PH20B / PH20B1 devices (Not CDMA / Harrier)
And it cant be made, fixed, edited or reworked to work on any other device
You need Windows XP with SP2 to make ActiveSync 4 work! (or Windows 2000)
Flashing your device can turn it into a Paper Weight, this is your own risk
Flashing a Rom which is not from your carrier will void the warranty
The Partion Tool resets your Exteneded rom Password and you Will not be able to lock you EXT Rom if you revert back to CE2003
Upgrade Instructions:
First of all, backup ALL your USER data, including the files in \Storage, because you will lose EVERYTHING. You will also not be able to restore any Sprite/xBackup/Activesync etc. backup, basicly backup files made by backup softwares. So you'll have to reinstall everything.
Install Activesync 4.1 but uninstall any previous versions first.
This is a patched version, it will not cry about digital signatures and work slightly faster.
All patches will be based on this version.
Extract all files. You might need WinRAR for this.
You will see the following folders, place the extracted files of the latest rom to the appropriate directory.
BA WM5 Downgrade pack
PH20B
PH20B1
Preparation
WM5_mamaich_patched.
If you have not unhided and unlocked your Extended ROM yet
copy xda-developers_Unlocker.cab from the "Preparation\ExtROM unlocker - WM2003SE" folder to your device.
install it by tapping on it in filemanger
then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock". Do a soft reset.
Setup the Storage size to get a full 60MB and not 43 MB
Copy Repart_DOC.exe from the "Preparation\DOC repartitioning tool" folder to your device and launch it.
Set size of Extended ROM to 128 kb (or a bit more, if you want a NOT working extended ROM)
Press "Format now!" and wait until it is done (A few seconds). You will see a message that it is done.
Soft reset.
You will get an error message about your storage, just press yes and wait a few seconds.
Stop activesync.
Right click on taskbar -> Task Manager.
End the following processes: rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe
Put your device into bootloader mode.
Press Power + record (above the volume slider) + softreset at the same time.
You should see a white screen with "Serial" text on it and the Bootloader version.
Put your device into the cradle
Make sure that the charger of your PDA is connected to the cradle.
The text should change to "USB" now.
Copy the files into the correct location.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
copy nk.nbf from the folder "WM5_mamaich_patched" to PH20B folder.
Run BaUpgradeUt.exe, see next step.
If you have a PH20B1 device such as SX66
copy nk.nbf from the folder "WM5_mamaich_patched" to PH20B1 folder.
Run MaUpgradeUt_noid.exe, see next step.
Now you have launched the requred upgrade program,
Press next (it should recognize your device in 10-15 seconds).
You'll see that the new ROM version is 1.40, just ignore that, press next,
The upgrade process should begin in a few moments. It'll take about 10 minutes.
Hardreset based on Screen Information
When you are done, remove your device from the cradle.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen :) )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Setup your device
Follow the instructions on the screen
Setup Activesync Partnership on your PC.
Put your device into the cradle
Pair and sync your device.
If you have problems with the first sync, Try.
Disconnect your device
go to Start -> settings -> Connections -> Network cards.
Tap on "Remote_NDIS Host", and change to "Use server-assigned IP address" at the IP address tab.
Windows and your PDA may whine about duplicate names and "Cant determine IP address", just press okay.
Also check that you have turned off PC-Cllin Internet security 2005 Firewall (Windows XP firewall seems to work)
Now you should have a working WM5 BA device. However, you will notice that serveral things are missing from control panel and you can't adjust the brightness.
Test the device
Check the phone
Check your Regional settings
Check the time
You will now need to go to the New Patches, updates and Hotfixes Page in Wiki
Activesync
Version