This Guide is made especially for newbies to get to know, how to flash a device.
These are the steps on how to flash your device the first time:
CID-unlock your device (check the sticky threads in the upgrading-forum of your device to learn, how to do this). This needs to be done just once per device.
Search the upgrading forum of your device for the ROM, you like to flash. Then download and, if needed, extract it.
Check, if your Radio-ROM matches the new ROM. If you don't find any information in the ROM's thread don't mind. You can update your Radio ROM later if you gain any problems.
Make sure, your devices battery status is NOT LESS than 50%.
Connect your device to your computer and wait until activesync/Windows Mobile Device Center recognizes it
Last chance to synchronize and/or backup files. All files and databases will be deleted after performing the next step! (Optional: If you want to save your text messages and/or eMails, use a tool like DotFred's PIM Backup.)
Execute the .exe file you downloaded with the ROM.
Follow the instructions and DO NOT disconnect your device until flashing is finished.
Disconnect your device from your computer.
You need to delete the old activesync/Windows Mobile Device Center partnership, because it thinks, your device is not the same as before... and it is right ^^. Deleting an old partnership is only possible, if the device is not connected. (Optional) If you want to change the name of your device, do that now by clicking Start > Settings > System > About > Device ID. Enter the new name of your device and click on Ok.
Connect your device to your computer, create a new partnership and synchronize. Then configure your device to your needs and if needed install additional software.
Congratulations! You succeed flashing your device!
DotFred's